全国服务热线:13166299995

DN40美标橡胶伸缩节“150bar法兰标准”

来源:http://www.songjiangningbo.com/ 作者:上海淞江集团 发布日期:2019-09-18 16:02 浏览:
淞江集团为众多客户提供美洲标准橡胶柔性接管产品,主要采用美标150bar法兰标准,橡胶采用长度130mm标准,具有良好的减震和降噪效果。
The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. [ANSI] DN40 U.S. standard rubber flexible takeover "150bar" information, Meijiang Group provides many customers with American standard rubber flexible takeover products, mainly using U.S. standard 150 bar flange standard, rubber using 130mm length standard, with good shock absorption and noise reduction Effect.

橡胶接头行业TS压力管道生产许可单位,TS编号:TS2731B90-2020
Domestic rubber joint industry TS pressure pipe production license unit, TS number: TS2731B90-2020

【ANSI】DN40美标橡胶柔性接管“150bar”

【ANSI】DN40美标橡胶柔性接管“150bar”

【ANSI】DN40美标橡胶柔性接管“150bar”

【ANSI】DN40美标橡胶柔性接管“150bar”

【ANSI】DN40美标橡胶柔性接管“150bar”

基本信息:
名称:美标橡胶接头
型号:ANSI-150LB
口径:DN40(1 1/2 寸)
质保:3年 
优点:减震、降噪、补偿管道、可偏转、可位移。
介质:海水,120度以下弱酸碱。
生产厂家:上海淞江减震器集团有限公司
Essential information:
Name: American rubber expansion joint
Model: ANSI-150LB
Caliber: DN40 (1 1/2 inches)
Warranty: 3 years
Advantages: shock absorption, noise reduction, compensation for pipeline, deflection and displacement.
Medium: sea water, weak acid and base below 120 degrees.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
 
橡胶性能参数:
安装长度:130mm(150mm)
轴向拉伸:6mm
轴向压缩:8mm
横向位移:10mm
偏转角度:16°
橡胶:三元乙丙橡胶(淞江集团所有三元乙丙橡胶全部采用三井4045,含量在50%左右,有材质证明,有含量检测报告,也有国家型式试验中心的产品检测报告和性能检测报告等证书。)
Rubber performance parameters:
Installation length: 130mm (150mm)
Axial tension: 6mm
Axial compression: 8mm
Lateral displacement: 10mm
Deflection angle: 16 degrees.
Rubber: Ethylene-propylene-diene rubber (all the Ethylene-propylene-diene rubber of Songjiang Group adopts Mitsui 4045, the content is about 50%, there are material proof, there are content testing reports, there are also national type testing center product testing reports and performance testing reports and other certificates.)
 
法兰参数:
标准:ANSI-150LB
法兰外径:130mm
螺栓孔中心距:98.5mm
螺栓孔径:16mm
螺栓孔数:4
压力:150LB(PN20)
法兰:碳钢(Q235)
Flange parameters:
Standard: ANSI-150LB
Flange diameter: 130mm
Center distance of bolt hole: 98.5mm
Bolt diameter: 16mm
Bolt hole number: 4
Pressure: 150LB (PN20)
Flange: carbon steel (Q235)
 

以下是淞江集团介绍:
The following is the introduction of Songjiang group:
【ANSI】DN40美标橡胶柔性接管“150bar”

2018年参加上海国际阀门展现场:
2018 Shanghai international valve exhibition site
【ANSI】DN40美标橡胶柔性接管“150bar”

新型QT450法兰橡胶接头
New type QT450 flange rubber joint
【ANSI】DN40美标橡胶柔性接管“150bar”

橡胶接头行业TS压力管道生产许可证书:
Rubber joint industry TS pressure pipe production permit certificate
【ANSI】DN40美标橡胶柔性接管“150bar”
 
相关链接:淞江集团电子工程案例
Related links